WELCOME!

Other Country website links -  India | Global | Middle East


CONDO OPERA OT

Catagory : Filter Housings

CONDO OPERA OT

LAMINAR FLOW UNIDIRECTIONAL OT FILTRATION MODULE | CASINGS
Laminar Flow Operation Theatre HEPA Housing with multiple arrays of HEPA filters with Diffusers for absolute Efficiency Filters.

PRODUCT SPECIFICATIONS
Category Laminar HEPA Ceiling Terminal Module for Operation Theatre
Conformity Standards ASHRAE / ASHE Standard-170; NFS 90-351
Housing Box material Stainless steel/ Galvanized steel or Mild Steel-Powder Coated.
Finish SS 304/ RAL 9010 or equivalent grade to prevent corrosion
Design and Construction As a single unit or as separate Modular Units. Each separate unit can be bolted together at site as a single unit. The joints are later mechanically sealed to be Leak proof & airtight.
Diffuser / Face Guard Perforated type-SS Diffuser/ G.I or M.S Powder Coated. Fully Removable type or Hinged type.
Spigot connection Lateral or Top spigot
Spigot circular or Rectangular with Flanges
Central square or rectangular opening For Surgical Light provision
Filter Installation & Mounting Filter installed from room side by removing diffuser/ Hanging chains provided for hinged type diffuser. Filter locking using quarter turn locks or quick clamping mechanisms with gasket compression inbuilt.
Test port Single Port per module to measure filter replacement pressure drop at site.
Pressure Monitoring DP switch for signaling filter replacement
Hanging Clamps Fully welded hanging Clamps used for ceiling suspension
Performance Testing Each Laminar OT module shall be fully leak tested. All welds and penetrations shall be bubble tested for leaks and must meet zero leakage criteria.
HEPA Filter Seamless PU Gasket type or Gel Seal type. Please refer Hepa filter technical catalogue for selection.
HEPA Grade as per EN 1822 H14
Maximum Final pressure drop of filter 500 Pa
APPLICATIONS

Features & Advantages

  • The CONDO Opera OT modules is used in Operation Theatre for providing laminar flow filtered air.
  • The Laminar flow Terminal modules are used as final filtration at room ceiling side with H14 grade HEPA filters.
  • The laminar flow system complies with ASHRAE / ASHE Standard-170 and NFS 90-351.
  • Optimal aseptic conditions are being achieved due to laminar air flow which is gradually directed toward exhaust openings.
  • The Laminar OT improve quality and cleanliness of air in hospitals with the aim of avoiding pathogen transmission between patients and medical crew.
  • The system is especially recommended for operating rooms with high aseptic conditions for conducting transplants, cardiac surgery, orthopaedics, neurosurgery, ophthalmic.
  • The system can be built as a single element or as separate units for ease of handling, transportation, positioning and assembly at site.
  • Recommended air flow velocity above operation table is between 30-50 fpm.
  • The recommended Air change rate as per ASHRAE standard in operation theatre is 20 or higher for unidirectional flow. Recirculation unit is not recommended by ASHRAE.
  • The height of the unit is 450 mm or above, depending on filter depth and spigot size.
  • The spigot connections can be rectangular type or circular type. The rectangular spigot will have flanges to connect with duct work.
  • The hood shall have channels to fix the HEPA filter. In case of Gel seal HEPA filter, integral knife edge shall be provided.
  • The diffuser plate shall have hemmed edges.
  • A wide range of HEPA filter choices based on airflow handling capacity and pressure drop criteria can be opted for.
  • The HEPA filters are tested and certified as per EN 1822 and complies to ISO 14644 standard of testing.
  • Filters are selected based on airflow, efficiency and pressure drop requirements.
  • All the hoods shall be fully leak tested, visually inspected and tested as per the standards for the Zero leak performance.
  • In house test certificates are provided for HEPA filter and housing Box certifying its leak proof performance.
ABOUT APTERTECH

Apter Technology Co Ltd, Group of companies has committed & Dedicated itself to provide the Clean Air for Better world with less carbon emissions by providing value added, Bench MarkedAir filters and Air Filtration needs for the Commercial & Residential Applications.
Apter Technology produces its products in different locations and supplies around the world.

HEAD OFFICE

Apter technology Co., Ltd.
14F3, Yuchi Road, Taipei
110 Taiwan, R.O.C

INDIA

Apter Technology Industrial Private Limited

© 2025 APTERTECH. All Rights Reserved