PAINT GLASS ROLLS
Catagory : PAINTBOOTH Filters
PAINT GLASS ROLLS
GLASS FIBER MEDIA ROLLS | PAINTBOOTH FILTERS
High Viscose oil & without oil dense packaged glass fibre media for paint collection applications. Different Roll sizes and cut pads available.
| PRODUCT SPECIFICATIONS | ||
|---|---|---|
| Filter Category | Disposable Glass fiber media (Paint arrestor) | |
| Efficiency (ISO 16890) | ISO COARSE 30% / ISO COARSE 45% / ISO Coarse 55% | |
| Filter Class (EN 779: 2012) | G2 / G3 / G4 | |
| Filter Class (ASHRAE 52.2: 2017) | MERV 4 / MERV 6 / MERV 8 | |
| Filter Depth | 1”, 2”,3”, 4” & 5” | |
| Filter Media | Glass fiber | |
| Recommended Final Pressure Drop | 1” wg | |
| Maximum Temperature | 80°C | |
| Nominal Media Velocity | 0.65 m/sec – 1.75 m/sec | |
APPLICATIONS
- Floor filter for paint mist separation In Automobile industry, Body paint Shops, Carpentry workshops
- Fan Coil Units
- Packaged Units
- Air Handling Units
- Industrial Plants
- Compressor air intake
- Gas Turbine Pre-Filtration
- Engine Rooms
- Refrigeration Plants
Features & Advantages
- Continuously-spun viscose glass fibre media rolls and pads which is resin bonded
- Dimensionally elastic glass-fiber medium with a progressive structure
- Openly structured face side (green) and increasing fiber density towards the clean air side (white)
- Mainly used as paint arrestor media in Automotive industry, body paint shops, carpentry workshops in extract side and also used for fresh air intake applications in HVAC systems.
- High Dimensional stability even when paint loaded
- Low compressibility – entire fiber glass material depth is used for storing paint mist
- Thermally stable up to 80 Deg C
- Ideally suited for arresting water-based paints and hydro paints
- Mainly used as floor filter for color mist separator
- High dust holding capacity
- For special applications like engine, turbine and smooth flow compressor air intake systems, the dust holding capacity and efficiency is further increased by impregnating the media with a gel-type adhesive.
- By compressing the media pads into smaller frames of 1” & 2” thickness, the density and therefore the efficiency is increased even more
- They can be installed in new or existing systems and arranged either in banks or in filter housings or used as media rolls itself.